Building PyPy from Source

For building PyPy, we recommend installing a pre-built PyPy first (see Downloading and Installing PyPy). It is possible to build PyPy with CPython, but it will take a lot longer to run – depending on your architecture, between two and three times as long.

Even when using PyPy to build PyPy, translation is time-consuming – 30 minutes on a fast machine – and RAM-hungry. You will need at least 2 GB of memory on a 32-bit machine and 4GB on a 64-bit machine.

Clone the repository

If you prefer to compile your own PyPy, or if you want to modify it, you will need to obtain a copy of the sources. This can be done either by downloading them from the download page or by checking them out from the repository using mercurial. We suggest using mercurial if you want to access the current development.

You must issue the following command on your command line, DOS box, or terminal:

hg clone http://bitbucket.org/pypy/pypy pypy

This will clone the repository and place it into a directory named pypy, and will get you the PyPy source in pypy/pypy and documentation files in pypy/pypy/doc. We try to ensure that the tip is always stable, but it might occasionally be broken. You may want to check out our nightly tests: find a revision (12-chars alphanumeric string, e.g. “963e808156b3”) that passed at least the {linux32} tests (corresponding to a + sign on the line success) and then, in your cloned repository, switch to this revision using:

hg up -r XXXXX

where XXXXX is the revision id.

Install build-time dependencies

(Note: for some hints on how to translate the Python interpreter under Windows, see the windows document . For hints on how to cross-compile in a chroot using scratchbox2, see the arm document in the RPython documentation)

To build PyPy on Unix using the C translation backend, you need at least a C compiler and make installed. Further, some optional modules have additional dependencies:

cffi, ctypes
libffi, pkg-config
zlib
libz
bz2
libbz2
lzma (PyPy3 only)
liblzma
sqlite3
libsqlite3
curses
libncurses + cffi dependencies from above
pyexpat
libexpat1
_ssl
libssl

Make sure to have these libraries (with development headers) installed before building PyPy, otherwise the resulting binary will not contain these modules.

On Debian, this is the command to install all build-time dependencies:

apt-get install gcc make libffi-dev pkg-config libz-dev libbz2-dev \
libsqlite3-dev libncurses-dev libexpat1-dev libssl-dev

For the optional lzma module on PyPy3 you will also need liblzma-dev.

On Fedora:

yum install gcc make libffi-devel pkgconfig zlib-devel bzip2-devel \
lib-sqlite3-devel ncurses-devel expat-devel openssl-devel

For the optional lzma module on PyPy3 you will also need xz-devel.

On SLES11:

zypper install gcc make python-devel pkg-config \
zlib-devel libopenssl-devel libbz2-devel sqlite3-devel \
libexpat-devel libffi-devel python-curses

For the optional lzma module on PyPy3 you will also need xz-devel.

On Mac OS X, most of these build-time dependencies are installed alongside the Developer Tools. However, note that in order for the installation to find them you may need to run:

xcode-select --install

Run the translation

Translate with JIT:

pypy rpython/bin/rpython --opt=jit pypy/goal/targetpypystandalone.py

Translate without JIT:

pypy rpython/bin/rpython --opt=2 pypy/goal/targetpypystandalone.py

(You can use python instead of pypy here, which will take longer but works too.)

If everything works correctly this will create an executable pypy-c in the current directory. The executable behaves mostly like a normal Python interpreter (see Differences between PyPy and CPython).

Translating with non-standard options

It is possible to have non-standard features enabled for translation, but they are not really tested any more. Look, for example, at the objspace proxies document.

Installation

PyPy dynamically finds the location of its libraries depending on the location of the executable. The directory hierarchy of a typical PyPy installation looks like this:

./bin/pypy
./include/
./lib_pypy/
./lib-python/2.7
./site-packages/

The hierarchy shown above is relative to a PREFIX directory. PREFIX is computed by starting from the directory where the executable resides, and “walking up” the filesystem until we find a directory containing lib_pypy and lib-python/2.7.

To install PyPy system wide on unix-like systems, it is recommended to put the whole hierarchy alone (e.g. in /opt/pypy) and put a symlink to the pypy executable into /usr/bin or /usr/local/bin.

If the executable fails to find suitable libraries, it will report debug: WARNING: library path not found, using compiled-in sys.path and then attempt to continue normally. If the default path is usable, most code will be fine. However, the sys.prefix will be unset and some existing libraries assume that this is never the case.